Hebei Jingu Plasticizer Co.,Ltd
Model No.: EP918
Productivity: 100000 tons per year
Place of Origin: China
Supply Ability: 1000000tons/year
HS Code: 1518000000
Epoxy Fatty Acid Methyl Ester (EFAME)
EFAME can efficiently substitute DOP and DBP in production of PVC products, and contributes 20~30
portion quantity of the plasticizers in total.Epoxy Fatty Acid Methyl Ester has higher flash
point and high epoxy value, mainly use for high-end PVC soft products, such as foaming PVC leather,
garment leather electric ,wire,cable, etc.
1.High flash point.The flash point of Epoxy Fatty Acid Methyl Ester HM-02 has reached 190 to 195 degrees,The higher flash point, the less to evaporate, which can avoid the explosion and combustion
in the foaming tank during the PVC production process.
2.High epoxy value .The higher the epoxy value ,the less the epoxy value will be reduced when meets
high temperature .the effect of plasticizer will not be reduce , and can reduce the cost of PVC products
with more substitution .
3. No odor. It has no odor, which guarantees that the finished products have no odor and there is
not inoffensive odor in the workshop during rolling film and foaming production.
4. Environmental-protection: It is made of natural plant oil, which has the good environmental-protection
and also meet the EU environmental standards.
5. With good compatibility, low vaporization and good stability to the light and heat, Epoxy Fatty
Acid Methyl Ester could reduce the use quantity of stabilizer.
200kg/drum,1TM drum or flexible freight bag
It can be applied to all PVC products, especially in PVC sheet and artificial leather products. It is widely used in the cable wire, PVC tube, PVC sole and gland strip.
Copyright © 2019 Hebei Jingu Plasticizer Co.,Ltd All rights reserved.